Neoteck 8233D Pro - Controls and Indicators Overview; Exterior View and Components; Functional Push Button Operations

8233D PRO-EN
2
power to the circuit before connecting the meter to the circuit.
 Disconnect circuit power and discharge all high voltage
capacitors before testing continuity, diode, resistance,
capacitance or current.
Note international Electrical Symbol.
Dangerous
Voltage
Ground
AC Alternating
current
Warning
see explain in manual
DC (Direct
Current)
Double insulation
AC or DC
Fuse
Measurement category(over voltage category):
This instrument is meet the safety condition of CAT II. The equipment is
used for measurement in building facilities. Examples are
measurements on distribution boards, circuit breaker and industrial
equipment located in fixed facilities, as a fixed motor.
3. Explanation of controls and indicators
3-1. Meter illustration