COR User Guide Page 3
WHAT’S IN THE BOX
COR-20 Package Contents
The COR-20 package, depicted above, comes with:
❖ COR-20 driver
❖ COR pump
❖ 6’ (2m) AquaBus cable for connection to an APEX system
❖ 100w 24VDC power supply & power cord
❖ 1-1/4” threaded x 1-1/4” slip union for use on the COR pump output
❖ 1-1/4” threaded x 3/4” slip fitting for optional hard-piped use on the pump output
❖ 1-1/2” threaded x 1” slip fitting for optional hard-piped external plumbing
❖ O-rings for each fitting (not depicted)
❖ 5mm hex wrench
Note: the included power supply may be slightly different than the one depicted
The COR-15 package (not depicted) comes with:
❖ COR-15 driver
❖ COR pump
❖ 10’ (3m) 4-pin 1LINK male-to-male cable for connection of the COR-15 to an APEX
system via a 1LINK module or EnergyBar 832.
To Next Page
Loading...