Neptune Systems COR-20 User Manual

COR User Guide Page 5
The COR-15 and COR-20 driver may also be referred to as a ‘module’, however, the term
‘driver’ will be used throughout this user guide.
GET TO KNOW YOUR COR PUMP
APEX SYSTEM AOS/FIRMWARE REQUIREMENTS
Your APEX system MUST have a version of firmware installed which contains support for
the COR. The minimum required versions are:
1.5” intake, BSPP
threads
1.25” output,
BSPP threads
Detachable baseplate
with rubber feet
Titanium socket head
screws (4) for disassembly
One screw is not visible in this photo

Neptune Systems COR-20 Specifications

General

Brand	Neptune Systems
Model	COR-20
Category	Water Pump
Language	English