EasyManua.ls Logo

Nerf BLASTER SCOOTER - HOW TO ADJUST THE HEIGHT; Blaster Use; FIRING

Nerf BLASTER SCOOTER
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOW TO ADJUST THE HEIGHT
The handlebar can be locked into place at 2 different heights. Please make the following
adjustment to reach required height.
Open the Quick Release Lock, press the locking button, adjust the handlebar to a suitable
height, and then close the Quick Release Lock.
Blaster Use
CAUTION!
[MAIN IMAGE]
Do not aim at eyes or face. TO AVOID INJURY: Use only darts designed for this product. Do not modify darts
or dart blaster.
Be sure to read and follow all instructions carefully before using this product.
NOTE: JAM CLEARING DOOR must be fully closed for blaster to fire.
FIRING
Press and hold either button trigger till you here motors engage and dart blasts - then release. If you keep
trigger button pressed – darts will blast in rapid fire mode very quickly.
[IMAGE OF TRIGGERS]
3

Other manuals for Nerf BLASTER SCOOTER

Related product manuals