Nerf CAM ECS-12 - Initial Setup and Dart Loading; Battery Installation and Shield Attachment; Loading Darts into Clip

Camera
TO INSERT BATTERIES
LOADING DARTSATTACH SHIELD
Blaster
Use a Phillips/cross
head screwdriver
(not included).
Use a Phillips/cross
head screwdriver
(not included).
Load darts into
QUICK-RELOAD
CLIP.
• Be sure darts
are inserted in
direction indicated
on CLIP.
• Insert 1 dart
at a time and
push down.
• CLIP can hold
up to 12 darts.
Attach camera
shield to blaster.