4. PRESS AND KEY TO REACH THE MINUTES OF THE DESIRED
WAKE UP TIME, THEN PRESS THE KEY TO CONFIRM.
5. ADJUST THE VOLUME LEVEL AS DESIRED (FROM LEVEL 03-30) BY PRESSING
OR KEY. PRESS THE KEY TO CONFIRM.
E-6
SNOOZE FUNCTION
- WHENEVER THE ALARM C OMES O N, IT C AN B E TEMPORARILY S USPENDED
FOR A SHORT PERIOD O F 9 MIN UTES, B Y PRESSIN G THE “ SNOOZE/ D IM MER” K EY
ONCE.
- THE ALARM W IL L THEN AUTOMATICALLY COME O N AGAIN AFTER THE 9 M IN UTES
“SNOOZE” P ERIO D HAS E NDED.
- THE PROCEDURE C AN B E R EPEATED F OR APPROXIM ATELY 60 M IN UTES FROM
ORIG INAL ALARM WAKE-UP TIME.
2. THE SET WILL NOW AUTOMATICALLY SWITCH "ON" AT THE WAKE-UP TIME AS YOU
HAVE CHOSEN, AS LONG AS THE ALARM FUNCTION IS "ACTIVE".
3. TO TURN OFF THE UNIT AFTER IT HAS AUTOMATICALLY SWITCHED ON,
SIMPLY PRESS THE KEY ONCE. THIS WILL SWITCH OFF THE SET,
ALSO THE ALARM SETTINGS WILL CLEAR.
4. TO ACTIVATE THE ALARM AGAIN, REPEAT THE PROCEDURE OF "ALARM TIME
SETTING" AS DESCRIBED.
90
MINS
80
MINS
70
MINS
60
MINS
50
MINS
OFF*
40
MINS
30
MINS
20
MINS
10
MINS
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS THE SLEEP KEY,
THE "SL" SYMBOL LIGHT ON, THEN PRESS THE SLEEP KEY REPEATEDLY
TO CHOOSE THE AUTOMATIC POWER OFF TIME.
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
AUTOMATIC POWER OFF SLEEP FUNCTION
BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE
WITHIN 30 FEET.
SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK AND CONTROL FROM
YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
- PRESS THE KEY TO TURN THE UNIT ON.
- PRESS THE SOURCE KEY UNTIL BT SYMBOL APPEARS.
- THE LED INDICATOR WILL FLASH SLOWLY TO INDICATE THE UNIT IS ON.
- PRESS AND HOLD "PAIR" KEY UNTIL THE LED INDICATOR FLASHING FAST AND
WAITING FOR PARING.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOTH DEVICE:
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE’S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE’S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER “0000”
- THE LED INDICATOR WILL KEEP REMAIN LIT WHEN PAIRED.
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANY DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
®
E-5
SINGLE-DAY ALARM FUNCTION
EVERY TIME YOU SET THE WAKE-UP ALARM, IT WILL WORK ONLY ONCE (ONE TIME).
THIS MEANS THAT THE NEXT DAY, THE ALARM WILL BE RESET AND
WILL NOT AUTOMATICALLY WAKE UP AGAIN.
- THIS SET IS EQUIPPED WITH 2 ALARM MODES: BUZZER AND RADIO.
BEFORE SETTING THE ALARM, MAKE SURE TO SET THE CLOCK (SEE "DIGITAL
CLOCK FUNCTION" IN THE PREVIOUS SECTION) .
PREPARE FOR THE ALARM SETTINGS
1
2. PRESS AND HOLD KEY UNTIL THE DISPLAY WILL NOW SHOW:
. PRESS THE KEY TO PUT THE SET INTO "STANDBY" MODE
00 00
HOUR (FLASHING)
MINUTES
(FLASHING)
8 00
A. "ALARM" TIME SETTING
ONCE THE DESIRED SOURCE IS READY, PRESS THE KEY TO PUT THE SET
INTO STANDBY MODE AND THEN SHORT PRESS THE KEY REPEATEDLY
TO SELECT THE SOURCE AS DESIRED.
B. "ALARM" MODE SETTING
NOW SELECT THE SOURCE THAT YOU WISH THE UNIT TO PLAY AT THE "WAKE UP"
TIME AS BELOW:
FOR RADIO :
PRESS THE KEY TO SWITCH ON THE SET (DISPLAY BACKLIGHT WILL
BE "ON").
TUNE IN THE DESIRED STATION.
*REMARK: = BUZZER ALARM / = RADIO
FM
1. THE ALARM TIME IS NOW FULLY PROGRAMMED AND THE ALARM SYMBOL WILL
APPEAR TO INDICATE THAT THE ALARM FUNCTION IS "ACTIVE".
(DISPLAY SHOWS AS FOLLOWS)
CURRENT TIME
12:00
ALARM SYMBOL
AL
FM
FM SYMBOL
Set
Set
3. PRESS AND KEY TO REACH THE HOUR OF THE DESIRED WAKE UP
TIME THEN PRESS KEY TO CONFIRM.
THE DISPLAY WILL NOW SHOW:
Set
Set
Set
To Next Page
Loading...
