EasyManua.ls Logo

Nescafe Dolce Gusto DROP - 5 F I R St U S E

Nescafe Dolce Gusto DROP
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
5. FIRST USE
30 sec
ON
1
4
7
2
5
8
3
6
Rinse water tank manually with fresh drinking
water. Fill water tank with fresh drinking water.
Place cap and insert water tank into machine.
Start rinsing with cold water: Set bar display to
max. level with touch volume selector. Touch
cold water icon. Machine starts rinsing.
Insert empty capsule holder. Place an empty
largecontainerunderneaththecoeeoutlet.
Ensure to use the correct mains voltage as
given in “2. OVERVIEW“ on page 5. Connect
power plug to mains power socket.
Waituntilcountdownisnishedandmachine
stops.
Waituntilcountdownisnishedandmachine
stops.
Switch machine on. While machine is heating
up, power button starts blinking red. After
approx. 30 seconds, power button lights up
steady green and machine is ready.
Continue rinsing with hot water: Set bar display
to maximum level with touch volume selector.
Touch hot water icon. Machine starts rinsing.
Emptycontainer.Rellwatertankwithfresh
drinking water. Insert water tank back into
machine. Place drip grid on drip tray. Then
insert drip tray at desired position.

Related product manuals