Neschen COLDLAM 1650 - Safety Pictograms; Fire Safety

11
•
••
• Turning the laminator off by pressing the Emergency STOP button can be done by any
person who has noticed that the laminator operator is in danger.
•
••
• After you have stopped working with the laminator, lift the top roller, switch the laminator off
and disconnect it from power mains.
13. SAFETY PICTOGRAMS ATTACHED TO NESCHEN LAMINATOR
The user must maintain the pictograms legible and if they became damaged, arrange for them to
be replaced.
Pictograms used and their meaning. Residual risks are covered by safety pictograms
attached to the laminator, and by warnings in these User Instructions.
14. FIRE SAFETY
Because the laminator is not factory-fitted with any fire extinguishing devices, the user must
install in the building in which the laminator is situated, suitable fire extinguishers.
• It is forbidden to use on a laminator which is on fire and which is under power, water or foam
fire extinguishers! Danger of injury by electric shock!
• Electrical equipment on fire must never be extinguished with water!
• Recommended types of fire extinguishers: powder, snow and halon.
• In the event of a fire, abide by fire instructions applicable to the particular workplace.
The operator
must read the
User Instructions
Before starting any
repairs, adjustments,
cleaning and
maintenance of the
laminator,
disconnect the
machine from power
mains
Before starting up
the laminator, be
sure all the covers
are correctly
closed
Caution,
do not touch
any places on the
laminator with
moving parts