FIG. 1
CARRIAGE REMOVAL
FIG. 2
CARRIAGE TILT
FIG. 3
BLADE REMOVAL
CLEANING INSTRUCTIONS
• Before cleaning turn off any switches and ensure the power cord is
removed from the electrical outlet and allow appliance to cool.
• Wipe the outside area of appliance with a damp cloth and dry with a lint
free cloth.
• Never place appliance in water or other liquids.
• Never use abrasive cleaners or scouring pads to clean any parts of this
appliance.
• Never immerse the base of this appliance in water or other liquid.
• The blade, slicing guard and food carriage can be removed and hand
washed in warm soapy water. Be careful when cleaning the blade, as it is
extremely sharp. Do not leave blade under water; trying to handle sharp
objects in water can be hazardous. See Fig. 2-4.
• Set thickness control to “P” or “0”. This will keep the blade edge covered
by support plate.
• For ease of cleaning, the food carriage can be tilted up or removed. Refer
to Fig 3.
• Remove blade by holding the blade with one hand and using two ngers
to pinch and turn blade locking screw. Unlock blade by turning screw
clockwise. Carefully remove blade and hold by using the blade locking
screw. Refer to Fig. 4.
• After cleaning and drying, install blade to base in reverse order of
removal.
To Next Page
Loading...
Need help?
General
