16
220-240 V, 50-60 Hz, <1260 W
max
19 bar
~ 3 kg
0.7 L
11.1 cm 23.5 cm 32.6 cm
TROUBLESHOOTING
SPECIFICATIONS
CONTACT THE NESPRESSO CLUB
For any additional information, in case of problems or
simply to seek advise, call the Nespresso Club. Contact
details of the Nespresso Club can be found in the
«Welcome to Nespresso» folder in your machine box or
at nespresso.com
In case of machine pick-up, please remove the
side panels and keep them safely.
No light.
➔ The machine has switched o automatically; press ON/OFF button.
➔ Check the mains: plug, voltage, fuse.
No coee, no water.
➔ Check the water tank, if empty, ll with potable water. Descale it if necessary.
➔ Lift the lever. Press one coee button and wait until water comes out.
Coee is not hot enough.
➔ Preheat cup. Descale the machine if necessary.
The lever cannot be closed completely.
➔ Empty the capsule container/Check that there is not a capsule blocked inside the machine.
Leakage or unusual coee ow.
➔ Check that the water tank is in position.
Lights ash irregularly.
➔ Call the Nespresso Club.
➔ Exit descaling procedure (see paragraph on descaling).
No coee, water just comes out
(despite inserted capsule).
➔ In case of diculties, call the Nespresso Club.
Machine switches itself o.
➔ To save energy the machine will turn itself o after 9 minutes of non use. See paragraph on «Energy
saving concept».
Front light is red.
➔ Water tank is empty or needs to be cleaned.
Pannel cannot be clipped.
➔ Ensure orientation as indicated per the arrows inside the panel. Start to clip from the top.
In case the panel still does not clip, call the Nespresso Club.
UM PIXIE_CLIPS_JP.indb 16 28.04.15 11:59