7
21
5 6
3 4
1
1
3
2
2
Unplug the machine and remove
the water tank and maintenance
unit.
Clip the new side panel as shown
in the picture.
Ensure the panel is properly
secured.
NOTE: an additional set of
panels is oered with your machine.
CLIP/UNCLIP YOUR SIDE PANELS
Take the Pixie Clips machine as
shown in the picture.
Come and discover a wide range
of side panels to syle your machine
in your Nespresso Boutiques or
online at nespresso.com
Push with the thumb and pull
with the other hand to unclip
your side panel as shown in the
picture.
Position the new side panel, arrows
pointing up.
CAUTION: do not change the panels when the machine is hot
(wait 10 minutes after the last brewing).
EN
NOTE: the machine side panels has been designed to be easily clipped and unclipped without a specic tool.
These panels are designed for the Nespresso Pixie Clips machine.
UM PIXIE_CLIPS_JP.indb 7 28.04.15 11:59
To Next Page
Loading...
Need help?
General
