EasyManua.ls Logo

Nespresso O - Pair O by Nespresso

Nespresso O
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28 29
EN
13 DISPOSAL / RECYCLING
This appliance complies with the EU Directive 2012/19/EC. Packaging
materials and appliance contain recyclable materials. Your appliance
contains valuable materials that can be recovered or can be recycled.
Separation of the remaining waste materials into dierent types facilitates
the recycling of valuable raw materials. Leave the appliance at a collection
point. You can obtain information on disposal from your local authorities.
To know more about Nespresso sustainability strategy, go to
www.nespresso.com/positive
9 “Replace capsule container” message
Capsule container is missing. Place it back.
• If the message persists, clean the capsule container sensor; see Cleaning section.
10 “Place cup” message despite already placed cup
Clean the cup sensor; see Cleaning section.
Check if the maintenance module is well positioned.
11 “Insert capsule” message despite inserted capsule
Turn the capsule.
Check if the capsule is not damaged or deformed.
Clean the capsule slot; see Cleaning section.
12 Capsule is not properly recognized
Turn the capsule.
Check if the capsule is not damaged or deformed.
Clean the capsule slot; see Cleaning section.
13 ‘’Fill water tank’’ message
Check if water tank is filled until max. level.
Check if water tank is properly inserted.
14 Brewing starts without a placed cup or capsule
Clean the cup sensor and capsule slot; see Cleaning section.

Related product manuals