EasyManua.ls Logo

Nespresso PRODIGIO - Descaling Procedure: Execution; Activating Descaling Mode on Machine; Preparing for Descaling Cycle; Starting and Monitoring the Descaling Cycle

Nespresso PRODIGIO
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
CN
22
清空滴水盘和粉囊盒。
进入除垢模式,先开机,持续并同时按住3个咖啡按键6秒钟直至听
到蜂鸣声。3个按键指示灯开始闪烁(按键在整个除垢过程中将一
直闪烁)。
在水箱中注入一袋
Nespresso
除垢剂和0.5
升水。
在咖啡出口下方放置一个
容积至少为0.8升的容器。
确保滑盖处于关闭状态并
一下任意咖啡按键开始
除垢循环。水泵开始工
作。水箱清空后水泵会自
动停止工作。
信息:除垢过程中保养提示灯会一直亮起
除垢
Empty the drip tray and
the used capsule container.
To enter the descaling mode, ensure the machine is ON, press and hold
the 3 coffee buttons for 6 seconds until the confirmation with a beep. The 3
buttons will start blinking (buttons will flash until the exit of this mode).
Fill the water tank with 1
unit of Nespresso descaling
liquid and add 0.5 L / 17 oz
of water.
Place a container (minimum
volume: 0.8 L / 27 oz) under
the coffee outlet.
Ensure the slider is closed
and press any coffee button
to start the descaling cycle,
pump will run. Machine will
stop automatically when
water tank is empty.
Info: maintenance light is ON during the descaling process.
Descaling /

Related product manuals