NESS L300 User Guide 31
Replacing Electrodes
The electrodes should be replaced every 2-3 weeks. It is
recommended to replace the electrodes regularly in order to maintain
optimum efficiency.
Attention
The NESS L300 should be used only with electrodes
supplied by NESS Ltd.
1. Make sure the system is off
2. Pull the electrode gently out of its base. Take care not to detach
the electrode base, which is attached to the inside of the orthosis.
3. Snap in a new electrode, and make sure it's firmly attached to the
electrode base.
4. Remove the protective cover from the electrode before using the
system. The cover should be put aside and saved, for later use.
To Next Page
Loading...