Max 410/420/430 User’s Guide
65
A. 2 Common network connection problems
When I attempt to connect to my Max
410/420/430 through a serial cable connection, I
do not see any text, or the text that appears is
distorted.
• Make sure the connection settings are as
follows:
Baud rate 19200
Parity None
Character size 8
Stop Bit 1
Flow Control None
• Make sure the serial cable is connected and
fastened to both the Max 410/420/430 and
your computer.
My network supports DHCP, but my Max
410/420/430 cannot obtain correct network
settings.
• Make sure DHCP is enabled.
• Make sure the RJ-45 LAN cable is connected
securely to your Max 410/420/430 and LAN,
hub, or router.
• Make sure that all network ports, routers, or
hubs are live.
To Next Page
Loading...
Need help?
General
