EasyManua.ls Logo

Netafim NETAJET 4G - High-flow Mode

Netafim NETAJET 4G
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
NETAJET
4G USER MANUAL
DESCRIPTION
High-flow mode
High-flow bypass system for pressurized-line water source
Operating principle:
The pressure differential required to generate fertilizer suction via the Venturis
is produced by a booster pump integrated in the NetaJet™ 4G. This mode of
operation, where the lower manifold is under low pressure (around 0 bar/PSI),
permits the use of high-efficiency Venturis with high suction capacity and low
motive flow consumption.
Suitable for main line flow rate:
80-400 m³/h (350-1760 GPM)
Flow limitation depends on the fertilizer injection rate and the size of the Venturis.
Suitable for main line pressure:
Standard: 2.5-5.8 bar (36.5-84.0 PSI)
High pressure: 5.8-7.5 bar (84.0-108.5 PSI)
Dosing channels:
Accommodates a wide variety of highly accurate dosing channels for fertilizer and concentrated/diluted acid:
Up to 5 x 50-1000 l/h (13-265 GPH)
Optional - Concentrated acid channel, 50 l/h (13 GPH)
Total fertilizer/acid suction capacity - up to 5000 l/h (1320 GPH).
Controller:
NMC-Pro (Operation with third-party controllers is optional. Consult Netafim.)
EC/pH:
Precise single or dual monitoring and control - selectable by customer.
Front view Back view

Other manuals for Netafim NETAJET 4G

Related product manuals