EasyManua.ls Logo

Netafim NETAJET 4G - Capabilities; Service; Maintenance; Add-Ons

Netafim NETAJET 4G
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
NETAJET
4G USER MANUAL
DESCRIPTION
Capabilities
NetaJet™ 4G modes fed by a pressurised main line are suitable for a vast range of main line pressures
Standard: 2.5 - 5.8 bar (36.5 - 84.0 PSI)
High pressure: 5.8 - 7.5 bar (84.0 - 108.5 PSI)
For main line pressures lower than 2.5 bar (36.5 PSI), consult Netafim.
NetaJet™ 4G modes fed by a storage tank
The water level in the storage tank should not be higher than 5 meters (16.4 feet) above the NetaJet™ 4G
inlet.
Various dosing channel configuration options
Most modes: Up to 5 highly accurate dosing channels of various types,
from 50 l/hr (13 GPH) up to 600 l/hr (158 GPH) each.
Octa mode: Up to 8 highly accurate dosing channels of various types,
from 50 l/hr (13 GPH) up to 600 l/hr (158 GPH) each.
High-flow mode: Up to 5 highly accurate dosing channels of various types,
from 50 l/hr (13 GPH) up to 1000 l/hr (264 GPH) each.
Service
The NetaJet™ 4G utilizes modular construction, making servicing a simple and quick process.
The dealer keeps a small quantity of interchangeable components on hand, for replacement on site within
a few minutes.
Maintenance
To prevent failures and extend the life cycle of the NetaJet™ 4G, regular maintenance must be carried out
by the user, such as periodic rinsing of filters and calibration of the EC and pH sensors.
Regular maintenance of the NetaJet™ 4G is a time- and cost-efficient process requiring no special tools or
skills.
Add-ons
You can extend the functionality of your NetaJet™ 4G by means of the the wide variety of useful add-ons.
All the add-ons are easy to connect to the NetaJet™ 4G - here are a few examples:
Fertilizer meter with electric output
Enables continuous reading of fertilizer dosing. Useful in applications where the costumer wants a broader
indication of fertilizer flow in addition to the EC and pH readings. Installed externally, controlled and
monitored by the
NetaJet™ 4G
NMC Pro controller.
Stock selection
Enables the dosing of multiple fertilizers through a single dosing channel (in cases where simultaneous
dosing is not required). Available in a wide variety of configurations, from a single channel with 2 fertilizers
to as many channels and fertilizers as required. Installed externally, controlled and monitored by the
NetaJet™ 4G
NMC Pro controller.
For further information on the NetaJet™ 4G add-ons, consult Netafim™.

Other manuals for Netafim NETAJET 4G

Related product manuals