additional information on your configured system. You might also want to have access to the Release Notes for
your version of ONTAP for more information about this system.
NetApp Hardware Universe
Find the Release Notes for your version of ONTAP 9
You need to provide the following at your site:
• Rack space for the storage system
• Phillips #2 screwdriver
• Additional networking cables to connect your system to your network switch and laptop or console with a
Web browser
Steps
1. Unpack the contents of all boxes.
2. Record the system serial number from the controllers.
3. Inventory and make a note of the number and types of cables you received.
The following table identifies the types of cables you might receive. If you receive a cable not listed in the
table, see the Hardware Universe to locate the cable and identify its use.
NetApp Hardware Universe
Type of cable… Part number and length Connector type For…
10 GbE network
cable
X6566B-2-R6, (112-00299), 2m
X6566B-3-R6, 112-00300, 3m
X6566B-5-R6 , 112-00301, 5m
Network cable
40 GbE network
cable
40 GbE cluster
interconnect
X66100-1,112-00542, 1m
X66100-3,112-00543, 3m
40 GbE network
Cluster interconnect
100 GbE
network cable
100 GbE
storage cable
X66211A-05 (112-00595), 0.5m
X66211A-1 (112-00573), 1m
X66211A-2 (112-00574), 2m
X66211A-5 (112-00574), 5m
Network cable
Storage cable
This cable applies
to AFF A700 only.
433
To Next Page
Loading...
