A printable PDF of step-by-step instructions with live links to additional content.
•
Video steps
Video step-by-step instructions.
•
Detailed steps
Online step-by-step instructions with live links to additional content.
Quick steps - AFF A900
This topic gives graphic instructions for a typical installation of your system from racking
and cabling, through initial system bring-up. Use this content if you are familiar with
installing NetApp systems.
Access the Installation and Setup Instructions PDF poster:
AFF A900 Installation and Setup Instructions
Video steps - AFF A900
There are two videos; one showing how to rack and cable your system and one showing
an example of using the System Manager Guided Setup to perform initial system
configuration.
Video one of two: Hardware installation and cabling
The following video shows how to install and cable your new system.
Animation - AFF A900 Installation and setup instructions
Video two of two: Performing end-to-end software configuration
The following video shows end-to-end software configuration for systems running ONTAP 9.2 and later.
[] | https://img.youtube.com/vi/WAE0afWhj1c?/maxresdefault.jpg
Detailed steps - AFF 900
This article gives detailed step-by-step instructions for installing a typical NetApp system.
Use this article if you want more detailed installation instructions.
Step 1: Prepare for installation
To install your system, you need to create an account on the NetApp Support Site, register your system, and
get license keys. You also need to inventory the appropriate number and type of cables for your system and
collect specific network information.
You need to have access to the
NetApp Hardware Universe for information about site requirements as well as
additional information on your configured system.
What you need
683
To Next Page
Loading...
Need help?
General
