NetApp AFF FAS8700 System Documentation

7. Reinstall either the side panels or the interconnect brackets, as applicable:
◦ If your system cabinet is not connected to another system cabinet, reinstall the side panels.
◦ If your system cabinet is connected to another system cabinet with an interconnect kit, reinstall the
interconnect brackets.
Reinstall the illuminated badge
After the system cabinet door is installed, you need to install the illuminated badge to
complete the door reversal process, and then close and lock the front door.
1. Using the following illustration for reference, reinstall the illuminated badge on the front door of the system
cabinet:
2. Close and lock the front door.
Swap out internal disk drive
Video overview
This video shows an overview of the embedded drive replacement procedure.
NetApp video: Hot-swapping an internal disk drive
Hot-swap embedded drive
Which procedure to use
You can replace a failed drive on your platform nondisruptively by choosing the procedure
appropriate to the drives that your platform supports. The procedure for Hot-swapping an
SSD is meant for non-spinning drives and the procedure for Hot-swapping an HDD is
meant for spinning drives.
1486

NetApp AFF FAS8700 Specifications

General

Brand	NetApp
Model	AFF FAS8700
Category	Storage
Language	English