NetApp AFF - Page 1072

If your system has… Then…
A network connection a.
Press
y when prompted to restore the backup configuration.
b.
Press
y when prompted to overwrite
/etc/ssh/ssh_host_ecdsa_key.
c.
Press
y when prompted to confirm if the restore backup was
successful.
d.
Press
Y when prompted to the restored configuration copy.
e.
Set the impaired controller to advanced privilege level:
set
-privilege advanced
f.
Run the restore backup command:
system node restore-
backup -node local -target-address
impaired_node_IP_address
g.
Return the impaired controller to admin level:
set -privilege
admin
h.
Press
y when prompted to use the restored configuration.
i.
Press
y when prompted to reboot the impaired controller.
No network connection a.
Press
n when prompted to restore the backup configuration.
b. Reboot the system when prompted by the system.
c. Select the Update flash from backup config (sync flash) option
from the displayed menu.
If you are prompted to continue with the update, press
y.
1070