Configuration setup
Configuring with a smartphone or a tablet
1) Open your smartphone’s web-browser and go to: “welcome.netatmo.com”. You will be able
to download the WELCOME companion app (iOS and Android compatible).
You need internet access for this operation.
2) Power the camera with the provided micro-USB power supply wall adapter. A green light
shines during all the booting process.
WARNING: When you configure your Netatmo WELCOME camera with a smartphone or a
tablet, the camera must be powered all-time.
3) Turn the camera over to put it in pairing mode. A blue light will glow.
The phone/tablet connects with the camera using Bluetooth. You need to have your phone’s
Bluetooth turned on. To turn it on please visit the phone’s settings menu.
4) Once the camera and your phone correctly paired, the blue light will stop glowing.
5) Follow setup steps detailed in the App.
6) When asked in the app, (the blue light must have restarted to glow) turn back the camera in
its normal position. The light will shuts down.
To Next Page
Loading...
General