Netatmo Smart thermostat User Manual

Replace
Disconnect your old thermostat.
Remove it from the wall.
Pass the wires through the Netatmo
mounting plate and screw the latter to the
wall.To hide potential scratches and holes
left behind, use the trim plate.
Screw the control wires previously identified
into the electrical terminals and insulate the
unused wires.
Place and screw the protection cover onto
the electrical terminals.
1
2
3

Netatmo Smart thermostat Specifications

General

Type	Smart Thermostat
Voice Assistant Support	Amazon Alexa, Google Assistant, Apple HomeKit
Certifications	CE, RoHS
Compatibility	Compatible with most heating systems (gas, oil, electric, underfloor)
Connectivity	Wi-Fi
Control	Smartphone App
Power Supply	3 AAA batteries
Dimensions	83 x 83 x 22 mm
Power Source	Battery
Control Method	App
Operating Temperature	0°C to 45°C
Display	E-ink