| Industrial IoT
11
NTC-221/NTC-222/NTC-224/NTC-227
4G LTE Cat 1 Industrial IoT Router
6. Desk mount
When selecting a location to mount the router, keep in mind that it features two
high performance antennas designed to provide optimum signal strength in a
wide range of environments. If you nd the signal strength is weak, try moving the
router to a different place, mounting it differently or changing the orientation of the
antennas.
The signal strength LEDs update within a few seconds with a rolling average signal
strength reading. When selecting a location for the router, please allow up to 20
seconds for the signal strength LEDs to update before repositioning.
Use cable ties
(max. 5mm width)
through holes
in the mounting
bracket
5. Pole mount using DIN rail bracket4. DIN rail mount
To Next Page
Loading...
Need help?
General
