| Industrial IoT
17
NTC-221/NTC-222/NTC-224/NTC-227
4G LTE Cat 1 Industrial IoT Router
Step 7: Connect to the Internet
If the SIM Status is OK, the router automatically attempts to connect to the Internet
by detecting the correct APN and connection details.
If automatic conguration was unsuccessful, you must manually enter the
connection details.
To manually congure the connection prole:
1. From the top menu bar, select the Networking option.
2. Next to Prole1, click the button. The Data connection prole settings
screen is displayed.
3. Ensure that the Automatic APN selection toggle key is set to the OFF
position.
4. In the APN eld, enter the APN name that your carrier requires for mobile
broadband connection. If required, enter the Username and Password in the
Username and Password elds. Click the Save button.
The connection prole is now congured.
Verifying the connection status
Click on the Status menu item from the top menu bar. The Status page is
displayed. The mobile broadband connection is established successfully if the
Status eld in the WWAN connection status section displays Connected.
To Next Page
Loading...
Need help?
General
