EasyManua.ls Logo

NetComm NP508

NetComm NP508
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NetComm
Wireless
THANKS FOR PURCHASING
NETCOMM WIRELESS
This quick start guide is designed to get you up and running quickly with your new router. More
advanced set up instructions can be found in the user manual which can be downloaded from
www.netcommwireless.com
SETTING UP YOUR POWERLINE ADAPTERS
1. Connect one end of the supplied Ethernet cable into the LAN Ethernet port of your
modem/router.
2. Connect the other end of the cable into the Powerline Adapter with the AC
pass-through socket.
3. Connect the Powerline Adapter to a power point near your modem/router.*
*For best performance plug your Powerline Adapters directly into the wall. Do not connect to a powerboard.
4. At this point, you can plug another electrical appliance into the Powerline Adapters AC
pass-through if you wish to do so.
5. Plug the WiFi Powerline Adapter into a power point near where you want to access a
wireless connection or connect a device via cable.
6. If connecting via cable, you can use the second supplied Ethernet cable to connect
the Ethernet port of the Powerline Adapter to your device e.g. PC, set-top box, gaming
console, blu-ray player.
7. Both Adapters will take a short time to nd each other. Once they have, the Powerline
LED
on both adapters will be on.
1 2
3
Router

Other manuals for NetComm NP508

Related product manuals