ESTABLISHING WIFI CONNECTION
You can connect multiple WiFi devices, including laptops, desktops and PDA’s to your
Powerline Adapter by following the 2 basic steps.
1. Using your WiFi device, scan the WiFi networks in your area and select the network that
is the same as the Wireless SSID that is listed on the sticker on the device. Then click
connect. The Wireless SSID will be in the format NetComm Wireless XX
2. Enter the wireless security key for your device. This is a random password that is also
listed on the sticker.
LEDS
What can the LEDs tell me?
The powerline LED
changes colour depending on the speed of your data transfer.
- Fastest
- Faster
- Fast
- Lights up when a device is connected to the adapter via an Ethernet cable
- Lights up when the adapter is connected to a power point
- Lights up when WiFi function is enabled (WiFi Powerline Adaptor Only)
LEDs Off - The adapter is not paired or wall socket not turned on.
BUTTONS
WiFi Powerline Adaptor Only
- When pressed for 2 seconds, will start WPS pairing function
- When pressed for 5 seconds will reset the device
Dual Band switch - Allows you to manually switch to a 2.4GHz or 5GHz WiFi frequency
Both Adaptors
Simple Connect Button - Create or join a Powerline network. More details on next page.
To Next Page
Loading...
