Updating the APN
The default connection proles for both SIM-A and SIM-B are congured for
manual conguration. If the SIM you have inserted is from a carrier that allows a
blank APN, the router should automatically connect to the Internet. However, if
you wish to congure the APN manually, navigate to Basic Network >
WAN & Uplink > Internet Setup > WAN-1 > Edit > Connection with
SIM-A / SIM B card and enter the APN into the APN eld. Click the Save
button to save your changes.
NOTE: SIM B is disabled on units purchased through Telstra. On these units,
congure the SIM card in slot A.
To Next Page
Loading...