Netduma R2 - Connecting Wired Devices; Powering On

8.
Quickstart Guide (2 of 3)
TIP : For the best results, connect your game console(s) via wired Ethernet.
A) Disconnect any other wired devices that are
connected to the ISP Modem / Router (or any
other router you own) and connect them
instead to the Netduma R2.
B) At this point the only device wired to your
ISP Hub should be your Netduma R2.
A) Turn on the Modem / Router provided by
your Internet Service Provider. (ISP).
B) Connect your Netduma R2 power adapter
into the power socket of the Netduma R2, and
connect the other end into your Power Outlet.
C) Turn your power on. Both your Netduma R2
and your ISP Hub should now be on.
Step 3: Connecting Wired Devices
Modem / Router
Provided by your ISP
Netduma R2
Step 4: Powering On
Netduma R2
Power Adapter
Power Outlet