Security Gateway Manual XG-7100-1U
Two LAN switches
In this scenario, the LAN switch from the previous example will be split into two LAN switches.
A new LAN network should be created in pfSense first. Similar to the existing LAN interface, another VLAN interface
should be used so the switch can segment traffic appropriately.
Create a new VLAN with lagg0 as the parent under Interfaces -> Assignments -> VLANs:
Once the VLAN has been created, it should look something like this:
Add, enable, and configure the VLAN interface under Interfaces Assignments:
© Copyright 2020 Rubicon Communications LLC 41
To Next Page
Loading...
