Do you have a question about the Netgate Netgate-2100 and is the answer not in the manual?
Storage | 16 GB eMMC |
---|---|
WAN Ports | 1 |
Serial Port | No |
Weight | 1.5 lbs |
Console Port | Yes (RJ-45) |
USB Ports | 2 |
Operating System | pfSense |
Network Ports | 5 x 1 GbE |
LAN Ports | 4 x 1 GbE |
Discusses the next steps after initial connection and configuration.
Guide to accessing and logging into the firewall's web-based graphical user interface.
Step-by-step walkthrough of the initial firewall configuration process using the setup wizard.
Final steps of the initial configuration and accessing the dashboard.
Overview of the pfSense Plus dashboard and its components.
Instructions on how to restart the initial setup wizard for configuration changes.
Procedures for backing up and restoring firewall configurations.
Information on accessing the device via the serial console port.
How to check for and install software updates for the Netgate appliance.
Description of the physical ports located on the rear of the Netgate 2100 appliance.
Details about the four LAN Ethernet ports and their switched functionality.
Information on additional ports like USB, Micro SIM, and reset button.
Description of the physical ports and LED indicators on the front of the Netgate 2100.
Important safety instructions and warnings for using the device.
Guidelines regarding electrical compliance and safe connections.
Compliance information related to Federal Communications Commission (FCC) rules.
Compliance information for Industry Canada regulations.
Compliance information for Australian and New Zealand standards.
Information regarding CE marking and product compliance.
Statement on RoHS and WEEE directives for disposal and environmental impact.
Formal declaration of the device's conformity to relevant directives.
Procedures and terms for resolving disputes and arbitration.
Governing laws and legal jurisdiction for terms of use.
Policies regarding website usage, modifications, and clause severability.
General miscellaneous legal terms and conditions.
Details of the product's limited warranty and liability.
Steps for installing necessary drivers for USB console port connectivity.
Guide on connecting the appliance to a workstation using a USB console cable.
Procedure for powering on the device after connecting the console.
How to identify the correct serial port on the workstation for console connection.
Guidance on selecting and launching terminal programs for console access.
Recommended terminal settings for optimal console communication.
Common issues and solutions for console connection problems.
Discusses the next steps after establishing a console connection.
Prerequisites and necessary information before configuring an OPT interface as a WAN.
Process of assigning an available OPT interface for WAN configuration.
Steps to enable and configure the new WAN interface, including IP settings and gateways.
Configuring Outbound NAT rules for traffic exiting the new WAN interface.
Setting up firewall rules to manage traffic for the new WAN interface.
Creating and configuring gateway groups for failover and load balancing.
Configuring DNS settings to ensure proper hostname resolution with multiple WANs.
Implementing policy routing to direct traffic through specific WANs or gateway groups.
Prerequisites for configuring an OPT interface as a new LAN segment.
Process of assigning an available OPT interface for LAN configuration.
Steps to enable and configure the new LAN interface, including IP settings.
Setting up a DHCP server for the new LAN interface to assign IP addresses.
Configuring Outbound NAT for clients on the new LAN to access the internet.
Defining firewall rules for the new LAN, covering 'Open' and 'Isolated' scenarios.
Describes the physical and internal connections of the switch ports.
Explains the default Port VLAN Mode and its capabilities.
Details on enabling and configuring 802.1q VLAN mode for advanced segmentation.
Information about training courses offered by Netgate for product knowledge.
Access to Netgate's library of helpful resources and documentation.
Details on professional services available for complex configurations or support.
Information on accessing the Netgate community forum for support and discussion.