EasyManua.ls Logo

Netgate SG-3100 User Manual

Netgate SG-3100
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Security Gateway Manual
SG-3100
© Copyright 2022 Rubicon Communications LLC
Jul 22, 2022
Question and Answer IconNeed help?

Do you have a question about the Netgate SG-3100 and is the answer not in the manual?

Netgate SG-3100 Specifications

General IconGeneral
Storage8 GB eMMC
WAN Ports1x 1GbE
LAN Ports3x 1GbE
Power Input12V DC
Network Interfaces5x 1GbE
Operating SystempfSense
Weight2.2 lbs (1 kg)
Serial Port1x RJ45
Power Supply12V DC
RAM2 GB DDR3L
Dimensions8.5 x 6.5 x 1.75 in (216 x 165 x 44.5 mm)

Summary

OUT OF THE BOX

Getting Started

Connect the Netgate appliance to the Internet to begin basic firewall configuration.

Initial Configuration

Steps to connect to the GUI and configure the firewall for the first time.

pfSense Plus Software Overview

The Dashboard

Overview of the pfSense Plus dashboard, navigation, and key information.

Backup and Restore

Procedure for backing up and restoring firewall configurations.

Connecting to the Console

How to access the system's serial console for troubleshooting.

Input and Output Ports

Rear Side

Description of the ports located on the rear panel of the Netgate appliance.

Front Side

Description of the front view of the appliance and its LED patterns.

Hardware Specifications

Safety and Legal

Safety Notices

Important safety warnings and instructions for using the device.

Electrical Safety Information

Guidelines for safe electrical connections and handling.

FCC Compliance

Statement of compliance with FCC rules for digital devices.

Declaration of Conformity

Statements of compliance with relevant EU directives.

Limited Warranty

Disclaimer of warranties and limitation of liability for the product.

HOW-TO GUIDES

Connecting to the Console Port

Guide to accessing the system's serial console for troubleshooting and configuration.

Reinstalling pfSense Plus Software

Procedure for reinstalling the pfSense Plus software from factory firmware.

M.2 SATA Installation

Guide for installing an M.2 SATA drive as an upgrade or alternative storage.

Configuring the Switch Ports

Steps to configure the four switched Ethernet ports as discrete ports.

Configuring an OPT interface as an additional WAN

Setting up an OPT interface to function as a secondary WAN connection.

Configuring an OPT interface as an additional LAN

Setting up an OPT interface to function as a separate local area network.

REFERENCES

Switch Overview

Overview of the switch's operation, capabilities, and port modes.

Additional Resources

Links to Netgate training, resource library, professional services, and community.

Warranty and Support

Information regarding the manufacturer's warranty and support options.

Related product manuals