CHAPTER
TEN
CONFIGURING THE SWITCH PORTS
This optional guide shows the steps required to configure the 4 switched Ethernet ports as discrete ports.
The following attributes are used in this configuration guide but can be changed to suit other requirements:
• Netgate 2100 Ethernet Port: LAN4
• IP Address Assignment: 192.168.100.1/24
• VLAN Tag: 4084 (VLAN tags should be 4081-4084 for LAN Ports 1-4)
Note: When connecting to the GUI, do NOT connect to any port being configured during this procedure or the device
will lose connectivity to the GUI.
1. Open the pfSense
®
Plus software GUI and log in.
2. From the menu, navigate to Interfaces > Assignments.
3. Go to the VLANs tab.
47
To Next Page
Loading...
