Netgate XG-7100-1U User Manual

Security Gateway Manual XG-7100-1U
Untagged traffic on ETH8 will be assigned a VLAN ID of 4091. ETH8 and the uplinks will also accept traffic that has
already been tagged with a VLAN ID of 4000 as well.
2.2 Connecting to the Console Port
There are times when directly accessing the console is required. Perhaps webGUI or SSH access has been locked out,
or the password has been lost or forgotten. This guide shows how to regain access directly through the console.
2.2.1 Install the Driver
A Silicon Labs CP210x USB-to-UART Bridge driver is used to provide access to the console, which is exposed via
the USB Mini-b (5-pin) port on the appliance.
If needed, install an appropriate Silicon Labs CP210x USB to UART Bridge driver on the workstation used to connect
with the system.
Windows
There are drivers available for Windows available for download.
Mac OSX
There are drivers available for Mac OSX available for download.
For Mac, choose the Macintosh OSX download.
Linux
There are drivers available for Linux available for download.
FreeBSD
Recent versions of FreeBSD include this driver and will not require manual installation.
© Copyright 2020 Rubicon Communications LLC 45

Netgate XG-7100-1U Specifications

General

Brand	Netgate
Model	XG-7100-1U
Category	Gateway
Language	English