Netgate XG-7100-1U - BIOS Update Procedure

Security Gateway Manual XG-7100-1U
Fig. 22: Remove the Faceplate Blank
7. Attach the bracket to the chassis using Short Board Mount Screws.
8. Line up the extender and insert it into the riser.
Warning: The connection is keyed, and the riser will only go in one way. Do not force it.
9. Carefully align the expansion card with the extender.
10. Insert the Expansion Card fully into the extender.
11. Place the L-Bracket behind the expansion card and screw into place using a Lid Screw.
12. Reattach the faceplate with 4 black faceplate screws.
13. Replace the lid.
2.6 BIOS Flash Procedure
2.6.1 Update via the GUI
Warning: This only works with Netgate systems running pfSense® version 2.3 or greater.
1. To install the package, navigate to System > Package Manager > Available Packages.
2. Click the Install button for the package named Netgate_Coreboot_Upgrade.
© Copyright 2020 Rubicon Communications LLC 66