WiFi icon on your mobile hotspot’s screen or through the mobile hotspot web page.
Quick Reference Section
Default WiFi name (SSID) Displayed on the front screen of your mobile hotspot when it is powered on,
and under the battery.
Default WiFi password (security key) Case-sensitive and displayed on the front screen of your mobile hotspot
when it is powered on, and under the battery.
Mobile hotspot web page http://netgear.aircard
Mobile hotspot web page password password
Getting Connected
Before you connect to your mobile hotspot, you must insert a micro-SIM card (3FF), install the battery, power on the
mobile hotspot, and charge your battery.
Note: To obtain a micro-SIM card, contact your Internet service provider.
To insert the micro-SIM card:
1. Remove the back cover using the thumb catch on the corner of the mobile hotspot.
2. Remove the battery.
3. Slide the micro-SIM card into the slot with the gold colored contacts facing down.
4. Ensure that the micro-SIM card is seated securely.
5. Reinsert the battery.
6. Replace the cover.
To power on your mobile hotspot:
Press and hold the Power button until the LCD screen lights.
To connect to your mobile hotspot:
To Next Page
Loading...
