NETGEAR AirCard 790 - Recharging Your Battery; Connect Devices

1. Ensure that WiFi is enabled on your computer or other device.
2. On your computer or other device, search for wireless networks:
For Windows devices, click the Internet Access icon.
For Mac devices, from the WiFi menu, select the network.
For tablets, look for a settings option.
3. Select the WiFi name displayed on your LCD screen.
4. Enter the WiFi password exactly as it appears on the LCD screen. Passwords are case-sensitive. When a
computer or mobile device connects to the mobile hotspot, a 1 displays beside the WiFi icon on the LCD
screen.
Note: For you to connect to the mobile broadband network, your SIM account must be active. If you use a
prepaid or pay-as-you-go micro-SIM, the account must show a positive balance.
5. Launch your browser and, if desired, visit the Mobile Hotspot web page http://netgear.aircard to personalize
your settings. Your mobile hotspot is ready to use out of the box. You probably don’t need to personalize any
settings.
The mobile hotspot is completely secure using its default security settings.
Note: If you see a message indicating that a mobile connection was not made, you might need to add an APN.
For information about adding APNs, refer to the user manual.
Recharging Your Battery
Your battery comes partially charged.
To recharge your battery:
1. Connect the micro-USB cable to your mobile hotspot.
2. Connect the other end of the cable to the USB port on your computer or to the USB charger.
Connect Devices
You can add devices to your network using a WiFi network manager or WPS if the device can use WPS.
Note: WPS enables you to connect WPS-enabled devices to a WiFi network without entering a WiFi password using
a keyboard.
To connect additional WiFi-capable devices:
1. Open the WiFi network manager on your computer or other WiFi device (such as smartphone, tablet, media
players, cameras, and so on).
2. Select the WiFi network name displayed on the LCD screen.
3. Enter the WiFi password displayed on the LCD screen.
4. Launch your browser.
To connect devices using WPS:
1. Press the Power button to awaken the LCD screen.
2. Tap the Wi-Fi icon. The Wi-Fi window displays.