NETGEAR AirCard 790

Use Your Mobile Hotspot
24
AirCard 790 Mobile Hotspot
Specify the WiFi Settings
From the touch screen, you can specify a number of WiFi settings. For more detailed profile
selections, visit the hotspot web page (http://netgear.aircard or http://192.168.1.1).
Note: Your device might use a different web page address. To get the web
page address for your device, tap Settings > More > Device
Information > AC790 Manager or look at the label underneath the
device battery.
You can establish any one of the following types of networks:
• Default, 2.4 GHz (No secondary network). Main WiFi only on the 2.4 GHz band. If you
configured a custom profile using the hotspot web page, you can return to the defaul WiFi
setting.
• 5 GHz W
iFi. Use this choice to transfer data at higher throughputs.
• Guest W
iFi. Main WiFi and guest WiFi on the 2.4 GHz band.
Note: Whenever you change WiFi settings, any devices connected to the
hotspot are disconnected and might need to be reconnected.
 To specify the WiFi settings from the touch screen:
1. T
o wake the device, press the Power key.
2. T
ap the Home ( ) button.