NETGEAR AirCard 790

Use Your Mobile Hotspot
60
AirCard 790 Mobile Hotspot
3. Tap the Settings button.
4. Tap the Airplane Mode button.
5. Slide the OFF button to the ON position.
Airplane mode is enabled.
 To enable airplane mode from the hotspot web page:
1. From a computer or WiFi device that is connected to your network, launch an Internet
browser
.
2. Enter http://netgear
.aircard or http://192.168.1.1.
Your device might use a different web page address. To get the web page address for
your device, tap Settings > More > Device Information >
AC790 Manager or look at the
label underneath the device battery.
A login window opens.
3. Enter the administrator login password.
The default password is password.
The password is case-sensitive.
The home page displays.