Share a USB Printer
142
AirCard Smart Cradle
2. Select Tools > Configuration.
3. Clear the Automatically execute when logging on W
indows check box.
4. Click the OK button.
Your change is saved.
To change the language:
1. Click the NETGEAR USB Control Center icon .
2. Select Tools > Configuration.
3. In the Language list, select a language.
4. Click the OK button.
The next time NETGEAR USB Control Center starts, the language changes.
To specify the time-out:
1. Click the NETGEAR USB Control Center icon .
To Next Page
Loading...