NETGEAR ARLO PRO

53
Modes, Rules, and Smart Alerts
4. Tap or click > next to the mode.
5. Under Rules, tap
or click Edit next to the camera.
6. Select the Turn Siren ON check box.
7. Tap
or click > next to Sound Alarm.
8. Set the sliders for Siren Duration and Siren Loudness.
9. Tap < Edit Rule or click Back.
10. Tap Done or click Save.
Note: Note: This rule is not active until you activate the mode to which you added the
siren trigger.
Add a Mode With Dierent Rules for Each Camera
With Arlo Pro Wire-Free, you can create multiple rules within the same mode so
that each camera performs dierent actions and sends dierent alerts.
You can also use schedule mode to activate modes automatically at dierent times
of the day or week. For more information about schedule mode, see Add a Schedule
on page 48.
¾ To add a mode with dierent actions or alerts for dierent cameras:
1. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the camera.
4. Tap or click Add a Mode.
The New Mode page displays.
5. Enter a name for the mode and Tap or click Next.
The Trigger Device page displays.