NETGEAR DGND3700 - N600 WIRELESS DUAL BAND GIGABIT User Manual

ADSL
Phone
Line
Laptop or desktop
computer
Package Contents:
N600 Wireless Dual Band Gigabit ADSL2+
Modem Router
DGND3700
Installation Guide
N600 Wireless Modem Router
Phone cable
Power adapter
Fiber/Cable modem
Step 1:
Connect to ADSL.
If connecting directly
to a DSL line.
Connect to Ethernet WAN.
If connecting to a
Fiber/Cable modem.
Step 2:
Cable your computer.
Step 3:
Power on your router.
Wait until the 2.4 GHz
Wireless LED turns solid
green.
Note: Add an ADSL filter for every
telephone on the same phone line
as your wireless modem router.
Internet
Internet
Power on/off
N600 Wireless Modem Router
Note: Keep the DGND3700
N600 Wireless Modem Router
in a vertical position.
Connect to Internet with ADSL or Ethernet WAN.
ADSL filter
ADSL
Phone
Line
Phone cable
Ethernet cable
Ethernet cable
“not included”
Power adapter
(installation continued on back page)
N600 Wireless Modem Router
Ethernet cable
2.4 GHz
Wireless LED

NETGEAR DGND3700 - N600 WIRELESS DUAL BAND GIGABIT Specifications

General

Wireless Standard	802.11a/b/g/n
Frequency Bands	2.4 GHz, 5 GHz
USB Ports	2 x USB 2.0
Wireless Speed	Up to 300 Mbps on 2.4 GHz + 300 Mbps on 5 GHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	Internal
Security	WPA, WPA2, WEP
DSL Modem	ADSL2+
Firewall	SPI, NAT
Dimensions	223 x 153 x 31 mm
VPN Support	VPN pass-through
Weight	0.48 kg (1.06 lb)

Summary

Internet Connection Setup

Connect to ADSL

Connect the modem router directly to a DSL line using an ADSL filter.

Connect to Ethernet WAN

Connect the modem router to a Fiber/Cable modem for Internet access.

Computer Cabling

Ethernet Connection to Computer

Connect your computer to the modem router using an Ethernet cable.

Router Power On

Powering and Verifying Router Status

Power on the router and wait for the 2.4 GHz Wireless LED to turn solid green.

Internet Access Configuration

Initial Internet Setup Wizard

Access the router login, follow the Setup Wizard, and enter DSL ISP credentials if needed.

Wireless Network Setup

Configure Wireless Network Names (SSIDs)

Set unique names (SSIDs) for your 2.4 GHz and 5 GHz wireless networks for easy identification.

Select Wireless Security Method

Choose WPA2-PSK (AES) for security and set a strong passphrase for your wireless networks.

Connecting Wireless Devices

Add Devices to Wireless Network

Connect wireless devices by selecting the network name and entering the passphrase or using WPS.