NETGEAR DGND3700v2 Installation Guide

7
5. Connect to the Internet.
Select Advanced > Setup Wizard to display the Setup Wizard
screen. Make sure Yes is selected. Then click Next and follow
the prompts to complete the Setup Wizard and be connected to
the Internet.
Note for DSL users: If your DSL ISP requires that you enter a
user name or password, you are prompted to enter this
information. If you do not have this information, contact your DSL
ISP (for more information, see Before You Begin on
page 2).
6. After connecting to the Internet, check for firmware updates by
selecting Advanced > Administration > Router Upgrade and
following the on screen prompts.
7. Click Logout and close your browser.
You are now able to enjoy your Internet service with the
NETGEAR DGND3700v2 N600 Wireless Modem Router.

NETGEAR DGND3700v2 Specifications

General

Model	DGND3700v2
Type	Wireless Router
Wireless Standard	802.11 a/b/g/n
Frequency Band	2.4 GHz / 5 GHz
Ethernet Ports	4 x 10/100/1000 Mbps
USB Ports	2 x USB 2.0
Antenna	Internal
Security	WEP, WPA, WPA2
Firewall	SPI, NAT
VPN Support	VPN pass-through
Dimensions	223 x 153 x 31 mm
Weight	0.5 kg
Wireless Speed	300 + 300 Mbps
WAN Ports	1 x ADSL2+