NETGEAR genie BASIC Settings
35
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the wireless modem router.
To view or change basic wireless settings:
1. On the BASIC Home
screen, select Wireless to display the Wireless Settings screen.
The screen sections, settings, and procedures are explained in the following sections.
2. Make any necessary changes, and click Apply to save
your settings.
3. Set up and
test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
To Next Page
Loading...
