To return the gateway to its factory settings, use the end of a paper clip to press and hold the
Reset button on the back of the gateway for at least 7 seconds. All LEDs simultaneously blink
amber three times. The gateway resets and returns to the factory settings.
Log In to the Gateway
To log in to the gateway to view or change its settings:
1. On a computer that is connected to the gateway with an Ethernet cable, launch an Internet
browser such as Mozilla Firefox or Microsoft Internet Explorer.
2. Type http://192.168.0.1 in the address field of the browser.
3. When prompted to log in, enter the user name admin and its default password of password.
The Product Family menu displays.
To Next Page
Loading...
