How to restart NETGEAR CG4500BD Gateway WiFi network?
If your NETGEAR Gateway WiFi network is unresponsive, restart it by turning off and unplugging the cable data gateway. Then, plug it back in and turn it on, waiting two minutes for it to fully reboot.
Why is the Internet LED off on my NETGEAR Gateway?
If the Internet LED (or Online LED for AC1900) on your NETGEAR Gateway is off, even when connected to the cable wall jack, ensure the coaxial cable connections are secure at both the gateway and the wall jack. Confirm that your cable service provider has provisioned your cable Internet service and that the signal quality is adequate. Also, remove any unnecessary splitters on your cable line, creating a direct connection to where the cable enters your home.
What to do if all LEDs are off on NETGEAR Gateway?
If all LEDs are off on your NETGEAR Gateway when it's plugged in, first, ensure the power cord is securely connected to both the gateway and a functioning power outlet. Verify you are using the power adapter that came with the gateway. If the issue persists, it might indicate a hardware problem, and you should contact Cox Support.
Why is the Ethernet LED off on my NETGEAR CG4500BD?
If the Ethernet LED is off for a port with an Ethernet connection on your NETGEAR Gateway, ensure the connected Ethernet device is set to receive an IP address automatically via DHCP, not a static IP address. Verify the Ethernet cable connections are secure at both the gateway and the Ethernet device. Confirm that the connected Ethernet device is powered on and that you are using the correct cable.
What to do if all LEDs stay on on NETGEAR CG4500BD?
If all the LEDs on your NETGEAR Gateway stay on, try clearing the configuration to its factory defaults. This will set the gateway's IP address to 192.168.0.1. If the problem continues, it could indicate a hardware issue, and you should contact Cox Support.
General| Device Type | Cable Modem Router |
|---|---|
| DOCSIS Standard | DOCSIS 3.0 |
| Wi-Fi Standard | 802.11ac |
| Ethernet Ports | 4 |
| Weight | 1.5 lbs |
| Wi-Fi Bands | Dual-band |
| Supported ISPs | Comcast, Spectrum, Cox |
| USB Ports | 1 x USB 2.0 |
Provides an overview of the cable data gateway's function and setup.
Details on the AC1900 model's hardware, including front/back panels and product label.
Details on the N900 model's hardware, including front/back panels and product label.
Details on the N450 model's hardware, including front/back panels and product label.
Guidelines for optimal placement of the gateway for best WiFi performance.
Covers setup requirements, TCP/IP, WiFi security, and different login types.
Instructions for accessing the NETGEAR genie interface via a web browser.
Steps to change the administrator password for the cable data gateway.
Explains manual and WPS methods for joining the WiFi network.
Guide to setting up NETGEAR Live Parental Controls with OpenDNS.
How to view and change WiFi settings like SSID, security, and channel.
Steps to enable and configure settings for a separate guest WiFi network.
How to view or change IP address and DNS server settings for the gateway.
Configuring WAN settings like port scan, DoS protection, DMZ, and MTU.
How to view or change LAN IP address, subnet mask, and DHCP server.
Guides for adding devices via WPS Push Button and PIN methods.
How to block specific keywords and domains for HTTP traffic.
Steps to block specific internet services or applications by port.
How to set schedules for when features like blocking are active.
Configuring email alerts for security events and log reporting.
Customizing firewall features, web filtering, and NAT ALG settings.
How to view cable, internet, and WiFi status and traffic statistics.
Tracking the gateway's initialization procedure and channel status.
Visualizing connected wired and WiFi devices on the network.
Identifying WiFi channels in use to avoid interference.
Displaying other WiFi access points in the environment.
Viewing, clearing, and sending the event log for diagnostics.
Backing up, restoring, and resetting the cable data gateway configuration.
Lists requirements and supported file system types for USB drives.
How to connect and access USB drives from Mac and Windows computers.
Using ReadySHARE Vault for centralized, automatic computer backups.
Configuring device name, workgroup, and access methods (HTTP, FTP).
Instructions for creating network folders and setting access permissions.
Procedure to safely disconnect a USB drive from the gateway.
Configuring the gateway as a ReadyDLNA media server for media players.
Covers managing WiFi radios, WPS settings, and MAC address access lists.
Guides on port forwarding, triggering concepts, and service management.
How to block or schedule blocking of devices using IP and MAC addresses.
Setting up Dynamic DNS and managing remote access to the gateway.
Configuring UPnP, NAT, Ethernet ports, and NTP settings.
Using ping and traceroute tests to diagnose connection issues.
Common problems and their quick troubleshooting solutions.
Understanding LED behavior for troubleshooting gateway status.
Steps to resolve problems preventing login to the cable data gateway.
How to view, refresh, and clear the event log for diagnostics.
Steps to resolve issues when the gateway cannot access the Internet.
Isolating and resolving problems with WiFi connection.
Diagnosing and fixing TCP/IP network response issues.
Table detailing default settings for router login, LAN, WAN, and WiFi.
Details on data protocols, power, dimensions, ports, WiFi specs, and safety.
To Next Page
