NETGEAR EX3700 Quick Start

19
c. Type your email address and password and click the LOG IN
button.
The Status screen displays.
5. Select Settings > WiFi Settings.
6. Scroll down and select Connected Devices.
The Connected Devices section displays the MAC addresses and
virtual MAC addresses for computers and WiFi devices that are
connected to the extender network.
7. On the router, add all of the virtual MAC addresses from your
extender to your router’s MAC filter table.
8. Enable the router’s MAC filter, wireless access control, or ACL.
I am connected to NETGEAR_EXT and launched a browser. Why
can’t I see the web browser setup guide?
Try these troubleshooting steps:
• Make sure that your computer is set up to use DHCP (most are).
• Make sure that the Device Link LED is green and that you are using a
valid IP address.
• Relaunch the web browser and type www.mywifiext.net in the
address field. Type your email address and password and click the
LOG IN button.

NETGEAR EX3700 Specifications

General

Type	-
Maximum transfer distance	- m
Windows operating systems supported	Yes
Power over Ethernet (PoE)	No
Product color	White
Antennas quantity	2
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WPS
Wi-Fi data rate (max)	750 Mbit/s
Ethernet LAN (RJ-45) ports	1
Package depth	178 mm
Package width	143 mm
Package height	99 mm
Package weight	310 g
Shipping (inner) case width	390 mm
Shipping (inner) case height	339 mm
Shipping (inner) case length	333 mm
Shipping (inner) case net weight	4550 g
Number of layers per pallet (air)	4 pc(s)
Number of layers per pallet (sea)	6 pc(s)
Number of cartons per pallet layer	9 pc(s)
Quantity per shipping (inner) case	12 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	67.17 mm
Width	55.17 mm
Height	39 mm
Weight	130 g