NETGEAR EX3700 Quick Start

6
Use the Extender in Extender Mode
Place the extender, apply power, and connect it to your WiFi network.
Place the Extender and Apply Power
1. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup
process.
2. Plug the extender into an electrical outlet.
Wait for the Power LED to light green. If the Power LED does not light,
press the Power On/O button on the extender.
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the extender
to your existing WiFi network. You can do this in one of two ways:
• Connect with WPS. For more information, see Connect with WPS on
page 7
.
• Connect with web browser setup. For more information, see
Connect with Web Browser Setup on page 9.

NETGEAR EX3700 Specifications

General

Type	-
Maximum transfer distance	- m
Windows operating systems supported	Yes
Power over Ethernet (PoE)	No
Product color	White
Antennas quantity	2
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WPS
Wi-Fi data rate (max)	750 Mbit/s
Ethernet LAN (RJ-45) ports	1
Package depth	178 mm
Package width	143 mm
Package height	99 mm
Package weight	310 g
Shipping (inner) case width	390 mm
Shipping (inner) case height	339 mm
Shipping (inner) case length	333 mm
Shipping (inner) case net weight	4550 g
Number of layers per pallet (air)	4 pc(s)
Number of layers per pallet (sea)	6 pc(s)
Number of cartons per pallet layer	9 pc(s)
Quantity per shipping (inner) case	12 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	67.17 mm
Width	55.17 mm
Height	39 mm
Weight	130 g