11
10. Use a WiFi network manager on the computer or mobile device to
connect to the extender’s newly created WiFi network.
Use your password to connect.
11. Select the check box and click the Continue button.
12. Unplug the extender and move it to a new location closer to the
area with a poor WiFi signal.
The location you choose must be within the range of your existing
WiFi router network.
13. Plug the extender into an electrical outlet and wait one minute.
The Power LED lights green. If the Power LED does not
light, press the Power button.
Use the Router Link LED on the front panel to help you choose a
spot where the extender-to-router connection is optimal.
To Next Page
Loading...
