8
Connect with NETGEAR genie Smart Setup
1. Make sure that the switch on the extender is set to Extender.
2. Use a WiFi network manager on a computer or mobile device to
find and connect to one of the extender WiFi networks.
The extender is dual band, so it has two WiFi networks:
• 2.4 GHz network. EX6100_NETGEAR_2GEXT
• 5 GHz network. EX6100_NETGEAR_5GEXT
After the connection with the computer or mobile device is
established, the Client Link LED lights solid green.
3. Open a web browser window from the same computer or mobile
device.
The browser takes you directly to the NETGEAR genie
®
smart
setup.
Note: If you are not automatically directed to NETGEAR genie,
launch a web browser and enter www.mywifiext.net in the
address field. Enter admin for the user name and password for
the password.
To Next Page
Loading...
